Automotive Masking Solution

Flexes to fit all shape gaps without adjustment – even sharp corners. Goes on in just one step. No need to “wet down” the glue. Sticks until you remove it. No special removal technique required. Sticks to all surfaces – metal, glass, rubber, plastic, EPDM rubber moldings. Re-positions in seconds; no need to start over. Fits any size gap: Comes in two sizes, doubles up for wide gaps, foam core slides out for narrow ones. No rubbery, baked-on oven residue to scrape away – heat-resistant up to 250º for up to 30 minutes. Comes off as easily as it goes on. No adhesive residue to clean off. Round shape naturally feathers edges, so you can touch up missed spots without having to repaint whole panels. Mask your car door, hood or trunk masking fast & easily by tube tape.

3/8” diameter with 1/4” diameter foam core, for modern vehicles’ tighter jambs (or put two pieces back to back to fill wider gaps)   1/2” diameter with 3/8” diameter foam core, for filling older vehicles’ larger door, hood gaps and mask a car trunk .   Each tube is 48” long. Made with 3M™ High Performance Green Masking Tape 401+. Sticks to metal, glass, rubber, plastic and EPDM rubber moldings. Sticks in place until removed.   Repositions and removes quickly and easily, with no adhesive residue. Temperature-resistant up to 250º F (121º C) for 30 minutes, so there’s no baked-on oven residue. Foam core slides out for narrow gaps (behind gas caps, for example). Double up tubes for wide gaps. Round shape naturally feathers paint edges; ideal for masking small “target areas” for painting Stores under normal conditions of 70º F (21º C) and 50% relative humidity in the original carton.