Automotive Masking Solution

Tube Tape Takes half the time of back taping Proper installation requires little training Round, to fit contours, fill gaps Goes on in 1 step Repositions in seconds Flexes to fit contours, even sharp corners Round shape naturally feathers edges for touch-up painting Back Tape Takes 2X longer than Tube Tape Proper installation requires experienced painter or prep man Flat Can take 3 steps per gap Often needs redoing Needs to be shaped and folded Flat shape can leave hard edges

Fills any jamb or gap, saves up to 30 minutes per car Here is some facts about automotive masking tape 3/8” diameter with 1/4” diameter foam core, for modern vehicles’ tighter jambs (or put two pieces back to back to fill wider gaps) 1/2” diameter with 3/8” diameter foam core, for filling older vehicles’ larger door and hood gaps Each tube is 48”” long. Made with 3M™ High Performance Green Masking Tape 401+ Sticks to metal, glass, rubber, plastic and EPDM rubber moldings Sticks in place until removed Repositions and removes quickly and easily, with no adhesive residue Temperature-resistant up to 250º F (121º C) for 30 minutes, so there’s no baked-on oven residue Foam core slides out for narrow gaps (behind gas caps, for example) Double up tubes for wide gaps Round shape naturally feathers paint edges; ideal for masking small “target areas” for painting Stores under normal conditions of 70º F (21º C) and 50% relative humidity in the original carton